Back to Used Equipment
Jacobsen's Logo

URM724 - Jacobsen AR722

Jacobsen AR722 Rotary Mower. 124 inch cut 
Engine Type Kubota® V2403-CR-T 4-cyl, turbocharged, liquid-cooled diesel Rated Horsepower* 65.2 hp (48.6 kW) Emissions Level EPA Tier 4 Final (EU Stage IIIB); Ultra-low sulfur diesel fuel required Displacement 148.5 cu. in. (2.434 L) Air Cleaner 2-stage Donaldson® dry cartridge type with evacuator valve and service indicator Cooling System Side-by-side radiator/hydraulic oil cooler; pressurized; 8 qt. (7.6 L) capacity Lubrication Fully pressurized with remote engine oil cooler Fuel Capacity 17 gal. (64.4 L) Oil Filter Type Full-flow, replaceable spin-on remote type Electrical System 12V input/output controller; 45-amp alternator; 600 CCA battery; engine control unit (ECU) Speed (Maximum) Mowing 7 mph (11.3 km/h) Transport 12 mph (19.3 km/h) Reverse 5 mph (8.1 km/h) Traction and Drive Traction System SureTrac™ 4WD, parallel-cross-series system; servo-controlled variable displacement hydro; four high-torque wheel motors; 2WD in reverse Deck Drive 3-section pump and direct-drive deck motors Hydraulic System 14 gal. (53 L) capacity; hydraulic tank oil level monitor and horn alarm; GreensCare biodegradable fluid; full-flow, 10-micron filter with 40 gpm capacity Hydraulic Cooling Side-by-side radiator/hydraulic oil cooler; pressurized Tires, Brakes and Steering Front Tires Two, 26.5 x 14-12, 6-ply turf tread Rear Tires Two, 22.5 x 10-8, 4-ply turf tread Brakes Dynamic, through traction system Parking Brakes Wet parking brakes integrated in front wheel motors; engage switch on control console Steering Rear wheel, hydrostatic power steering with tilt adjustable steering wheel Decks and Cutting Units Number and Size Seven, TrimTek™ 22 in. (55.9 cm) rotary cutting decks. Equipped for rear-discharge or mulching, with rear roller and scraper Deck Construction 7-gauge, heavy duty welded with pressed steel. Wing deck protection - front impact absorption system with spring and shear pin for wing decks 6 and 7 Caster Wheels Fourteen, 5.0 x 4.0 in. (12.7 x 10.2 cm) with greaseable tapered roller bearings Decks Lift/Lower Hand operated, joystick controlled hydraulic lift system. Individual control for wing decks 6 & 7 - engage/disengage to operate with 5, 6 or 7 decks Weight Transfer Adjustable hydraulic weight transfer - automatic electronic activation with mow switch. Disable switch on control console Blades Seven, 22.4 in. (56.8 cm) heat treated alloy combo blades Motor/Spindle Fixed displacement, self-lubricating with 1 in. (2.54 cm) diameter shaft; double sealed bearings Height-of-Cut 0.75 - 5.25 in. (19 - 133 mm) in 0.25 in. (6 mm) increments; minimal tools required for adjustment Overall Cutting Width 124 in. (3.15 m); 90 in. (2.29 m) with deck 6 and 7 raised Cutting Capacity Up to 8.7 acres per hour at 7 mph (3.52 ha/h at 11.27 km/h) (no overlaps or stops) Fuel Economy & Runtime 1.42 gal/hr (5.4 L/hr) fuel consumption at 40% load; Up to 12 hours on single tank of fuel (dependent on operation and turf conditions) Weight and Dimensions Weight (full fluids, less operator) 4449 lbs. (2018 kg) Length 130 in. (3.3 m) Height ROPS: 89 in. (2.26 m); ROPS down/folded: 61 in. (1.55 m) Wheelbase 63 in. (1.6 m) Width Mow: 133 in. (3.38 m); Transport: 98 in. (2.49 m
  • Year: 2017
  • Make: Jacobsen
  • Model: 68233
  • Stock #: URM724
  • Serial #: 6823301895
  • Class: Used
  • Est. Hours: 2300
  • Location: Johnston
  • Price: $0.00