Doyle Mfg. 1090 Bucket Elevator

Product Description

Doyle Manufacturing builds three types of Bucket Elevator:

• 1090 – 90 tons per hour (based on 60 lbs per cu ft material)
• 2012 – 120 tons per hour (based on 60 lbs per cu ft material)
• 2415 – 200 tons per hour (based on 60 lbs per cu ft material)

Standard Features:

• #304 stainless steel construction
• 20 ft. thru 70 ft. discharge heights available
• 90 ton per hour capacity (based on 60 lb. per cu. ft. material)
• 12″ #304 stainless steel turnkleen idler and rubber covered drive drum
• #304 stainless steel take-up bolts and hardware
• #304 stainless steel clean out and inspection doors in boot section
• #304 stainless steel inspection door in head section
• #304 stainless steel service door / clean out in first trunk section
• 11″ wide PVC belt
• 10″ x 6″ polyethylene buckets on 7″ centers
• Stainless steel bucket hardware
• Jackshaft drive, includes V-belt, sheaves, bushings, sprockets, chain, and TEFC motor
• 28″ wide x 25″ deep x 40″ high intake hopper

Optional Features:

• Ladders, cages, and platforms
• Spouting and spouting accessories available (1090 head discharge is 12″ square)
• Second intake hopper
• Intake hopper cover
• Payloader inload hopper, 4 ft. wide x 8 ft. long
• Fertilizer conditioner in above payloader hopper
• Gearbox drive
• #304 stainless steel digger buckets